Kyle Racing Products

 

04-07 CBR1000RR 30mm NIX Retrofit Kit

Motorcycle Part

An incredible package for owners who still cherish their 04-07 CBR1000RR. You not only get the latest and greatest 30mm NIX Cartridge Kit custom fit for a bike where this level of performance was never available for, but you also get the added...

K5-K6 GSXR1000 Ohlins 30mm NIX Retrofit Kit

Motorcycle Part

An incredible package for owners who still cherish their 2005-2006 GSXR1000. You not only get the latest and greatest 30mm NIX Cartridge Kit custom fit for a bike where this level of performance was never available for, but you also get the added...

Kyle Racing Bar CRG Mount Bar Ends for FZ-10 2017-2020

Motorcycle Part

Made in the USA Sold as a Set (you get 2 Bar Ends) 2 Bar Ends machined with a groove to accept CRG Arrow Mirrors. Fits: Yamaha Motorcycle 2020 MT09 - MT09LGY Yamaha Motorcycle 2020 MT10 - MT10LB Yamaha Motorcycle 2020 MT10 - MT10LCGY Yamaha...

Kyle Racing/Brembo Reservoir Mount Kits

Motorcycle Part

for adding a Brembo Reservoir to OEM Triple Clamp setup with 8mm pinch upper bolts

Kyle USA- Ohlins Superbike Fork Fender Mounts

Motorcycle Part

Kyle Racing Adjustable Front fender mounts for Ohlins Superbike forks These include the FG370, FG470, FG570, FG670, FGR700, FGR800, FGR900, FGR000, FGR100, FGR200 and FGR300 The mounts are a direct fit onto these SB Forks and are designed to...

Kyle USA Radial Brake Spacers

Motorcycle Part

Kyle USA Radial Brake Spacers

Kyle Racing Banjo Bolt for Brembo

Motorcycle Part

Available in single or double fitments

Replacement Bar for Kyle Racing Clip-ons

Motorcycle Part

Replacement Bar for Kyle Racing Clip-ons

Kyle Racing 6mm bolt hole bar end weights (pair)

Motorcycle Part

6mm bolt hole, bar end weights(sold in pairs)

Kyle Racing 8mm bolt hole bar end weights (pair)

Motorcycle Part

8mm bolt hole, bar end weights (sold in pairs)

Kyle Racing Titanium 8mm bolt hole bar end weights (pair)

Motorcycle Part

Kyle Racing Titanium 8mm bolt hole bar end weights (sold as a pair)

Titanium bar end weight with CRG Groove for Ducati Panigale

Motorcycle Part

NO LONGER AVAILABLE

Machined from Titanium 16mm bolt hole bar end weights. Designed to fit the Ducati Panigale with a groove that accepts the CRG mirror mount. Sold as a pair.

Kyle Bar End Weights Panigale CRG Mount

Motorcycle Part

Kyle Racing Stainless Steel Bar End Weights with CRG Mount groove for Ducati Panigale - SOLD AS A PAIR Bar end weights only (no mirrors) Fits: 1199, 1299, 959, 899 Panigale & Panigale V2 Available in Black Powdercoated Finish ONLY at this time...

Kyle Racing T-Shirt

Motorcycle Part

The Man, The Legend

Kyle Racing SS 16mm bar end weights Ducati Panigale 1199

Motorcycle Part

Machined from Stainless Steel 16mm bolt hole bar end weights. Designed to fit the Ducati 1199 Panigale. Sold as a pair.

Kyle USA Axle Hex Tool - Stainless Steel

Motorcycle Part

The last Axle Tool you will ever need!

No wimpy Aluminum or cheap Chromoly here, no sir this is Stainless Steel.

Why? Because we can!

Accommodates: 17mm, 19mm, 22mm & 24mm

Kyle USA Axle spacer RC51 Ohlins forks with Marchesini Wheel

Motorcycle Part

This is the correct sized spacer to use on Ohlins FG322 RC51 R/T forks when fitting a Marchesini or BST Wheel with captive spacers.

VFR1200F Ohlins 30mm NIX Cartridge Kit

Motorcycle Part

We are custom installing the latest & greatest Ohlins 30mm NIX Cartridge Kits into the OEM SHOWA forks on the VFR1200

Kyle USA Panigale Ride Height Tool

Motorcycle Part

MADE IN THE USA!

The Kyle Racing Panigale ride height tool used to measure the rear ride height and to allow precise setting of that height to our specs,

Kyle Throttle Tube/Adj. Angle Bars/Needle Bearings

Motorcycle Part

Kyle Racing Throttle Tube Plus Adjustable Angle bars with Needle Bearing Assembly for 848/1098/1198

Kyle Racing Swingarm Pivot Offset Insert BMW S1000RR 2010-2011

Motorcycle Part

Kyle Racing Swingarm Pivot Offset Insert BMW S1000RR

Kyle Racing Swingarm Pivot Offset Insert BMW S1000RR 2012

Motorcycle Part

Kyle Racing Swingarm Pivot Offset Insert BMW S1000RR 2012

Kyle Racing 50mm Adjustable Clip-ons

Motorcycle Part

Fully Adjustable clip-ons from Kyle Racing

Kyle Racing 52mm Adjustable Clip-ons

Motorcycle Part

Fully Adjustable clip-ons from Kyle Racing

Kyle USA BMW S1000RR Ride Height Tool

Motorcycle Part

Kyle USA BMW S1000RR Ride Height Tool

Kyle Racing Adjustable Angle bars for 848/1098/1198

Motorcycle Part

Kyle Racing Adjustable Angle bars for 848/1098/1198

Kyle Quik-Turn Throttle Tube for Ninja 250R NInja 300

Motorcycle Part

Kyle Racing Quik-Turn Throttle Tube for Ninja 250R

Kyle USA Ducati Ride Height Tool 848/1098/1198

Motorcycle Part

Kyle USA Ducati Ride Height Tool 848/1098/1198

Kyle USA Ohlins Ninja 250/300/400 Shock Spring Collar Adapters

Motorcycle Part

Kyle USA Ohlins KA840 KA841 KA744 Ninja 250/300/400 Shock Spring Collar Adapters

Allows the use of TTX Style Springs (21040-21041 Series)

Only available in natural aluminum color currently

Kyle Ducati Throttle Tube

Motorcycle Part

Kyle Racing Throttle Tube for 848/1098/1198/749/999 and Hypermotard

DOES NOT FIT SINGLE THROTTLE CABLE MODELS like the 2011 Hypermotard EVO SP

Kyle Ducati Ride Height Adjuster

Motorcycle Part

Kyle Ducati Ride Height Adjuster. Designed to work specifically with the shortened TTX shock & Kyle Track Link using your OEM heim joints.

Kyle Racing Stainless Steel Shift Rod

Motorcycle Part

Kyle Racing Stainless Steel Shift Rod

Kyle Racing BMW S1000RR Axle Blocks

Motorcycle Part

Kyle Racing BMW S1000RR Axle Blocks

Made in USA

Sold in pairs (left & right)

Kyle Racing BMW S1000RR Race Hooks

Motorcycle Part

We have a couple sets of these left in each color (Silver or Black) with very small blemishes in the finish so we are putting them on blowout pricing.

Kyle USA BMW S1000RR Stainless Steel Suspension Link Bolt

Motorcycle Part

Kyle USA BMW S1000RR Stainless Steel Suspension Link Bolt

Fork Spring Preload Adjusters 22mm

Motorcycle Part

Fork Spring Preload Adjusters 22mm

RC51 Fork Rework Options

Motorcycle Part

We now have 2 options for the RC51: